All you need for this aquarium cave is a CD spindle, aquarium stones, hot glue gun, drill, and aerator. DIY Aquarium Cave Decoration With Scrap MaterialĪn aquarium cave gives your fish a space to hide and play! You can make an aquarium cave with virtually everything except it is toxic to the fish, or they can eat it up quickly. If you are fine with what you have, however, let’s take a look at some of the other DIY solutions for the aquarium interior. Some people prefer to put a colored piece of cardboard or a print to create an atmosphere in the tank. Alternatively, you might want to do exactly the same with the back-glass panel. That way you’ll avoid scratches and also help keep the base of the tank warm. However, you can give it a couple of magic touches to slightly improve it.įor example, using small metal clips attach a thin piece of cardboard to the base. Technically, in this state, the aquarium is also wonderfully fine and can be used right away. During that time don’t move or touch it, the safer it will be. After enough time has passed, remove all duct tape and clean the glass of excessive silicon where required.įor added security, we recommend leaving the aquarium stand for a day to make sure that it holds up well. You may also want to stick the duct tape along the edges of a finished tank while waiting for the silicon to harden. The time needed depends on the type of silicon you used, just check the manufacturer’s instructions. Allow some time for the silicon to become completely fixed and harden. When you’re done remove the duct tape and clean the glass if needed. If you accidentally get silicon on the area of a glass that’s supposed to be clear, simply take it off using a scraper and continue. Using the same technique, attach all of the next glasses, firmly securing them against each other and making sure that nothing is loose. You can gently push something against it for some additional stability. It may be a bit unstable because the first one won’t be supported by anything else other than the silicon sealing. Once the silicon is in place, lift up the glass, and firmly push it down. If you’ve never used something like a silicon gun dispenser or a hot glue pistol, you want to practice on a piece of paper first to avoid wasting any materials. Using a gun dispenser, make a thin line of silicone along the edge of two walls, although it may seem a bit excessive. Deal with one side first and then go on to the next one, that way any mistakes are much easier to correct. Now it’s time to bring everything together! However, don’t apply the silicon to all of the sides simultaneously. Make sure that the silicon you use as the sealer is 100% hermetic and can be used in aquariums. In addition, you would require some of the more specialized equipment, like an aquarium silicone, silicone gun dispenser, and some sandpaper. They include strong duct tape, scraper with a blade, paper tissues, scissors, and cleaning wipes. The majority of the tools needed to build an aquarium are commonplace in almost any household. Now before we discuss the next steps, let’s quickly go through the instruments you would need for the job. This is to leave enough space for assembly. Also remember that the sidewalls should be slightly shorter than the side of the base glass, to which they will be attached. The front and back wall are usually the same length as the base glass. The walls of a fish tank come in pairs, so the dimensions of each pair should be the same. This helps ensure stability and prevent leaks. Always remember that the glass walls must stand on the base and not just attach to the sides.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |